On the use of methods and selection methods
First: first to determine your cable type, is not armored cable, if it is armored cable must use armored cable packing letter. For the use of armored cable stuffing box and selection rules, please refer to the official website or contact our customer service. If it is an ordinary cable, Stainless Steel Cables you do not need to use the armored blue head. (Note: This is the difference between armored and non-armored flange head selection)
Second: the use of environmental requirements, the general environment of poor places such as ships, chemical plants, petroleum engineering, natural gas, Stainless Steel Cables it is recommended to use the best anti-corrosion explosion-proof stainless steel. Some of the electromagnetic waves have a special place to interfere with the proposed use of BON brand matching anti-electromagnetic shielding cable grid head.
Three: According to the type of hole you choose different specifications of the first glory, and now the most practical four kinds of screwdriver specifications are public teeth, Germany teeth, British teeth, the United States teeth. Choose a good thread after the size of the cable to determine the outer diameter of the cable is how much, we correspond to the shrinkage of the joints on it. If there is no hole, Stainless Steel Cables you can choose different types of thread according to the outside diameter of the cable, according to the size and type.
Four: special requirements, such as the need to change the first flange, thread lengthening the first (thicker equipment thickness) can contact customer service to determine the above is the stainless steel cable grid head of the basic selection method, if other convenient questions , Stainless Steel Cables The specific customer service can be further understand Oh!
Five: Name: cable waterproof connector, also known as cable grid head, cable gland, cable packing letter, cable fixed head, cable lock
BON brand stainless steel explosion-proof cable connector usage in the know after the selection of the more simple.
The first step: the stainless steel cable head screw thread into the device, if there is no thread, is the hole, you need to screw in the electrical equipment inside the lock nut, Stainless Steel Cables nuts are attached (US thread NPT is the taper thread is not nuts Of the purchase, please note), so do not worry.
The second step, the cable through the BON brand stainless steel cable Glen head piercing fixed can be.
The third step: tighten the tighten the nut, the cable tighten the seal, and then pull down the cable, see will not move, generally do not have any problems, and if you want to move the cable later, only need to relax Tighten the nut
Features: Description of the characteristics of the product: Stainless Steel Cables special clamping claws and clamping ring high and low phase of the planning, with the tight head to install time-saving, with a wide range of clamping cable, tensile strength, waterproof, dust, Acid and alkali, grease and usually solvent and other characteristics. BON-type waterproof connector planning novel, practical and strong is widely used in lighting, mechanical machinery, wire and cable, and other areas.
Threads: Metric, PG, G (PF), and US-made Teeth (NPT)
Commodity materials: A, C, F some choice of brass nickel (can be customized 304 stainless steel), D some use of white nylon made, B, E some use of ethylene propylene rubber.
Protection class: in the rules of the bayonet range and the use of O-ring ring tight emergency, waterproof rating up to IP68.
Color varieties: A, C, F parts for the metal color. D is white, B, E is black.
Operating temperature: static: -40 ℃ to 110 ℃, Stainless Steel Cables short time up to 120 ℃. Dynamic: -20 ℃ to 80 ℃, a short time up to 100 ℃